How to scan to a computer
63
Scanning using the Scan key 11
a Load your document. (See How to load documents on page 27.)
b Press (Scan).
c Press a or b to choose Scan to PC.
Press OK.
d Press a or b to choose File.
Press OK.
e (MFC-9465CDN)
If you want to change the duplex setting, press a or b to choose 1sided, 2sided (L)edge
or 2sided (S)edge.
Press OK.
f (For Network users)
Press a or b to choose the destination computer you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the
destination computer using the dial pad on the control panel.
Press OK.
g Press Mono Start or Colour Start.
The machine starts the scanning process.
Choose the scan mode you want.
Scan to:
• USB
• Network
• FTP
• E-mail
• Image
• OCR
• File