Sending a fax
21
Checking and cancelling
waiting jobs 3
Check which jobs are still waiting in the
memory to be sent. If there are no jobs, the
LCD will show No Jobs Waiting. You can
cancel a fax job that is stored and waiting in
the memory.
a Press MENU.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Remaining Jobs.
Press Remaining Jobs.
Jobs that are waiting will appear on the
LCD.
d Press a or b to scroll through the jobs
and press the job you want to cancel.
Press OK.
e Do one of the following:
To cancel, press Yes. If you want to
cancel another job go to step d.
To exit without cancelling, press No.
f When you have finished cancelling jobs,
press Stop/Exit.
Setting your changes as the
new default 3
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX, Glass ScanSize and
Coverpage Setup you use most often by
setting them as the default. These settings
will stay until you change them again.
a Press (FAX).
b Press d or c to choose the setting you
want to change, and then press the new
option.
Repeat this step for each setting you
want to change.
c After changing the last setting,
press d or c to display
Set New Default.
Press Set New Default.
d Press Yes.
e Press Stop/Exit.
Restoring all fax settings to
the factory settings 3
You can restore all the fax settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Press (FAX).
b After changing the last setting,
press d or c to display
Factory Reset.
Press Factory Reset.
c Press Yes.
d Press Stop/Exit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
