56
11
Scanning a document 11
There are several ways to scan documents.
You can use the (SCAN) key on the
machine or the scanner drivers on your
computer.
a To use the machine as a scanner, install
a scanner driver. If the machine is on a
Network, configure it with a TCP/IP
address.
Install the scanner drivers on the
Installation CD-ROM. (See the Quick
Setup Guide and Scanning in the
Software User's Guide.)
Configure the machine with a TCP/IP
address if network scanning does not
work. (See Configuring Network
Scanning in the Software User's
Guide.)
b Load your document. (See How to load
documents on page 26.)
Use the ADF to scan multiple pages
of documents. The ADF feeds each
sheet automatically.
Use the scanner glass to scan a
page of a book or one sheet at a
time.
c Do one of the following:
To scan using the (SCAN)
key, go to Scanning using the scan
key on page 56.
To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver on page 57.
Scanning using the
scan key
11
For more information, see Using the Scan
key in the Software User's Guide.
a Press the (SCAN) key.
b Choose the scan mode you want.
Scan to:
USB
Network
FTP
E-mail (Server)
E-mail
Image
OCR
1
File
1
(Macintosh users)
Presto! PageManager must be downloaded
and installed before use. See Accessing
Brother Support (Macintosh) on page 4 for
further instructions.
c (For network users)
Choose the computer you want to send
the data to.
d Press Mono Start or Colour Start to
begin scanning.
How to scan to a computer 11
To Next Page
Loading...
Need help?
General
Weight and Dimensions
