Brother MFC-9970CDW - For Ad-Hoc Mode

Configuring your machine for a wireless network (For MFC-9560CDW)
10
3
For Ad-hoc mode 3
a Confirm your network environment. See page 11.
b Confirm your wireless network setup method. See page 12.
c Configure your machine for a wireless network. See page 16.
Wireless configuration and installing the printer driver have been completed.
 Ad-hoc mode
Connected to a wireless capable computer
without a WLAN access point/router
or
 Infrastructure mode See page 9
Connected to a computer with a WLAN access
point/router
Using the Setup Wizard from the control panel
(Recommended)
Using the Brother installer
application
See page 16 See page 26
Installing drivers and software (See the Quick Setup Guide)