Brother MFC-9970CDW - Set to Default

Control panel setup
42
5
7.Network
(continued)
1.Wired LAN
(continued)
2.Ethernet — Auto*
100B-FD
100B-HD
10B-FD
10B-HD
3.Wired Status — Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
4.MAC Address ——
5.Set to Default — 1.Reset
2.Exit
6.Wired Enable — On*
Off
2.WLAN 1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or
DHCP, you will be asked to enter how
many times the machine tries to obtain
the IP address.)
2.IP Address
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
4.Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name BRWxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config Auto
Static
Main menu Submenu Menu selections Options