Brother MFC-9970CDW - Function Table and Default Factory Settings; DCP-9055 CDN, MFC-9460 CDN and MFC-9465 CDN

Control panel setup
38
5
Function table and default factory settings 5
DCP-9055CDN, MFC-9460CDN and MFC-9465CDN 5
The factory settings are shown in Bold with an asterisk.
Main menu Submenu Menu selections Options
4.Network
(DCP-9055CDN)
7.Network
(MFC-9460CDN
and
MFC-9465CDN)
1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
4.Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config Auto*
Static
7.WINS Server Primary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
8.DNS Server Primary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
9.APIPA On*
Off