Brother MFC-9970CDW - Mfc-9560 Cdw

Control panel setup
41
5
MFC-9560CDW 5
Main menu Submenu Menu selections Options
7.Network
1.Wired LAN 1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or
DHCP, you will be asked to enter how
many times the machine tries to obtain
the IP address.)
2.IP Address
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
4.Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config Auto*
Static
7.WINS Server Primary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
8.DNS Server Primary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
9.APIPA On*
Off
0.IPv6 On
Off*