Brother MFC-9970CDW - Page 53

Telephone and external devices
45
6
Changing the Remote Codes 6
The preset Remote Activation Code is l51
(l91 for New Zealand). The preset Remote
Deactivation Code is #51 (#91 for
New Zealand). If you are always
disconnected when accessing your External
TAD, try changing the three-digit remote
codes, for example ### and 555.
a Press MENU.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Setup Receive.
Press Setup Receive.
d Press a or b to display Remote Codes.
Press Remote Codes.
e Press On or Off.
f If you chose On in step e, enter the new
Remote Activation Code.
Press OK.
g Enter the new Remote Deactivation
Code.
Press OK.
h Press Stop/Exit.