Brother MFC-J220

Menu and features
89
C
FAX ( )
Level1 Level2 Level3 Options Descriptions Page
Fax Resolution ——Standard*
Fine
S.Fine
Photo
Sets the resolution for
outgoing faxes.
See
1
.
Contrast ——Auto*
Light
Dark
Changes the lightness or
darkness of faxes you send.
Speed Dial Search —
Alphabetical
Order
Numerical Order
You can dial by pressing only
a few keys (and Start).
41
Set Speed Dial ——
Stores Speed Dial numbers,
so you can dial by pressing
only a few keys (and Start).
44
Setup Groups — — You can set up Group
numbers for Broadcasting.
See
1
.
Outgoing Call Send a fax
Add to Speed
Dial
Delete
— — You can choose a number
from the Outgoing Call
history and then make a
telephone call to it, send a
fax to it, add it to Speed Dial,
or delete it.
42
Caller ID hist. Send a fax
Add to Speed
Dial
Delete
— — You can choose a number
from the Caller ID history and
then send a fax to it, add it to
Speed Dial, or delete it.
43
Broadcasting Add Number
Speed Dial
Complete
— — You can send the same fax
message to more than one
fax number.
See
1
.
Real Time TX ——On
Off*
You can send a fax without
using the memory.
Overseas Mode ——On
Off*
If you are having difficulty
sending faxes overseas, set
this to On.
Glass ScanSize ——Letter
A4*
Adjust the scan area of the
scanner glass to the size of
the document.
23
Set New Default — — — You can save your fax
settings.
See
1
.
Factory Reset — — — You can restore all settings
to the factory settings.
1
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.