Chapter 2
14
c Load only one sheet of paper in the
manual feed slot with the printing
surface face up.
Portrait orientation
2
d Using both hands, gently adjust the
manual feed slot paper guides to fit the
paper.
e Using both hands, push one sheet of
paper into the manual feed slot until the
front edge touches the paper feed
rollers. Let go of the paper when you
hear the machine pull it. The
Touchscreen displays
Manual Feed Slot ready.
f Pull out the paper support (1) until it
locks into place, and then unfold the
paper support flap (2).
If the document does not fit on one sheet,
the Touchscreen will prompt you to load
another sheet of paper. Place another
sheet of paper in the manual feed slot, and
then press OK on the Touchscreen.
To Next Page
Loading...
