Brother MFC-J2320

General information
7
1
4 Receive Mode
Displays the current Receive Mode:
 Fax (Fax Only)
 Fax/Tel
 External TAD
 Manual
NOTE
(For some countries)
When the Distinctive Ring feature is
turned on, the Touchscreen displays D/R.
For details, see Online User’s Guide.
(For New Zealand)
When the FaxAbility feature is turned on,
the Touchscreen displays D/R. For
details, see Online User’s Guide.
5 Date & Time
Displays the date and time that has been
set in the machine.
Press to access the Date & Time menu.
6 Wi-Fi
Press to set up a wireless network
connection.
A four-level indicator on the screen
displays the current wireless signal
strength if you are using a wireless
connection.
7 Tray Setting
Press to access the Tray Setting
menu to change the paper size and paper
type.
8 All Settings
Press to access the Settings menu.
Entering Text 1
When you must enter text into the machine, a
keyboard appears on the Touchscreen.
Press to cycle between letters,
numbers and special characters.
NOTE
• To change between lowercase or
uppercase, press .
• You can change the keyboard setting of
the Touchscreen.
(See Online User’s Guide.)
Inserting spaces 1
To enter a space, press Space or you can
press c to move the cursor.
NOTE
The characters that are available may
differ depending on your country.
Making corrections 1
If you entered an incorrect character and
want to change it, press d to move the cursor
to highlight the incorrect character, and then
press . Enter the correct character. You
can also use the cursor to go back and insert
characters.
Press for each character you want to
erase, or press and hold to erase all the
characters.