Brother MFC-J2320

Chapter 10
32
Receive Mode settings 10
Ring Delay 10
Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine, choose the maximum number of
rings.
(See Online User’s Guide.)
a Press (Settings).
b Press All Settings.
c Press a or b to display Fax.
d Press Fax.
e Press a or b to display
Setup Receive.
f Press Setup Receive.
g Press a or b to display Ring Delay.
h Press Ring Delay.
i Press a or b to display the options, and
then press the number of times the
machine will ring before it answers
(2-10 for Australia, 1-10 for New
Zealand, 0-2 for Taiwan, 2-8 for South
Africa, 0-10 for some countries).
If you select 0, the machine will answer
immediately and the line will not ring at
all.
j Press .
F/T Ring Time
(Fax/Tel mode only) 10
When your machine receives a call, you and
your caller will hear the normal telephone
ring. The number of rings is set in the ring
delay setting.
If the call is a fax, then your machine will
receive it. However, if it is a voice call then the
machine will sound the F/T Ring (a fast
double-ring) for the time you have set in the
F/T Ring Time setting. If you hear the F/T
Ring, it means that you have a voice caller on
the line.
Because the F/T Ring is made by the
machine, extension and external telephones
will not ring. However, you can still answer
the call on any telephone by using a remote
code.
(See Online User’s Guide.)
a Press (Settings ).
b Press All Settings.
c Press a or b to display Fax.
d Press Fax.
e Press a or b to display
Setup Receive.
f Press Setup Receive.
g Press a or b to display
F/T Ring Time.
h Press F/T Ring Time.
i (For New Zealand)
Press 20, 30, 40, or 55 seconds.
(For other countries)
Press 20, 30, 40 or 70 seconds.
j Press .
NOTE
Even if the caller hangs up during the fast
double-ring, the machine will continue to
ring for the set time.