Brother MFC-J2330DW User Manual

MFC-J2730DW/MFC-J5730DW/MFC-J5930DW
1. Load your document.
2. Press [Copy].
3. Enter the number of copies in one of the following ways:
• Press [-] or [+] on the Touchscreen.
• Press to display the keyboard on the Touchscreen, and then enter the number of copies using the
Touchscreen keyboard. Press [OK].
• Enter the number of copies using the dial pad.
4. Press [Options] > [Enlarge/Reduce].
5. Swipe up or down or press a or b to display the available options, and then press the option you want to
change.
6. Do one of the following:
• If you selected the [Enlarge] or [Reduce] option, press the enlargement or reduction ratio you want.
• If you selected the [Custom(25-400%)] option, press (backspace) to erase the displayed
percentage, or press d to move the cursor, and then enter an enlargement or reduction ratio from [25%]
to [400%].
Press [OK].
• If you selected [100%] or the [Fit to Page] option, go to the next step.
7. Read and confirm the displayed list of options you have selected, and then press [OK].
8. When you have finished changing settings, press [Mono Start] or [Colour Start].
If you selected the [Fit to Page] option, your machine adjusts the copy size to fit the paper size set in
the machine.
• The [Fit to Page] option does not work correctly when the document on the scanner glass is
skewed more than three degrees. Using the document guidelines on the left and top, place your
document in the upper-left corner, with the document face down on the scanner glass.
• The [Fit to Page] option is not available when using the ADF.
• The [Fit to Page] option is not available for Legal size documents.
Related Information
• Copy
• Important Note
256

Brother MFC-J2330DW Specifications

General

Brand	Brother
Model	MFC-J2330DW
Category	All in One Printer
Language	English