MFC-J2730DW/MFC-J5730DW/MFC-J5930DW
1. Swipe left or right or press d or c to display [Web].
Press [Web].
• If information regarding the Internet connection appears on the machine's LCD, read the information
and press [OK].
• Occasionally, updates or announcements about Brother Web Connect's features will appear on the
LCD. Read the information, and then press [OK].
2. Swipe left or right or press d or c to display the service with which you want to register.
Press the service name.
3. If information regarding Brother Web Connect appears, press [OK].
4. Press [Register/Delete Account] > [Register Account].
5. The machine will prompt you to enter the temporary ID you received when you applied for Brother Web
Connect access.
Press [OK].
6. Enter the temporary ID using the LCD, and then press [OK].
An error message will appear on the LCD if the information you entered does not match the temporary ID
you received when you applied for access, or if the temporary ID has expired. Either enter the temporary ID
correctly, or apply for access again and receive a new temporary ID.
7. The machine will prompt you to enter the account name that you want to be displayed on the LCD.
Press [OK].
8. Enter the name using the LCD, and then press [OK].
9. Do one of the following:
• To set a PIN for the account, press [Yes]. (A PIN prevents unauthorized access to the account.) Enter a
four-digit number and press [OK].
• If you do not want to set a PIN, press [No].
When the account information you entered appears, confirm that it is correct.
10. Press [Yes] to register your information as entered.
11. Press [OK].
Account registration is complete and your machine can now access the service.
12. Press
.
Related Information
• Set Up Brother Web Connect
525
To Next Page
Loading...
Need help?
General
