Brother MFC-J2340DW - Page 521

Level 3 Level 4 Level 5 Level 6 Descriptions
WLAN(Wi-Fi) TCP/IP IPv6
- Turn the IPv6 protocol on or
off.
WPS/Push Button
- - Configure your wireless
network settings using the
one-button push method.
WPS/PIN Code
- - Configure your wireless
network settings using WPS
with a PIN.
WLAN Status Status
- View the current wireless
network status.
Signal
- View the current wireless
network signal strength.
SSID
- View the current SSID.
Comm. Mode
- View the current
Communication mode.
MAC Address
- - View the machine's MAC
address.
Wi-Fi Direct Manual
- - Configure your Wi-Fi Direct
network settings manually.
Group Owner
- - Set your machine as the
Group Owner.
Push Button
- - Configure your Wi-Fi Direct
network settings using the
one-button push method.
PIN Code
- - Configure your Wi-Fi Direct
network settings using WPS
with a PIN code.
Device
Information
Device Name
- View your machine's device
name.
SSID
- View the Group Owner's
SSID.
When the machine is not
connected, the LCD displays
Not Connected.
IP Address
- View your machine's current
IP Address.
Status
Information
Status
- View the current Wi-Fi Direct
network status.
Signal
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as
Group Owner, the LCD
always indicates a strong
signal.
I/F Enable
- - Turn the Wi-Fi Direct
connection on or off.
E-mail/IFAX Mail Address
- - Enter the email address.
(Up to 60 characters)
Setup Server SMTP Server
Enter the SMTP server name
and address.
Port
Enter the SMTP port
number.
514