Home > Fax > Telephone Services and External Devices > External TAD (Telephone Answering
Device) > Record an Outgoing Message (OGM) on the External TAD
Record an Outgoing Message (OGM) on the External TAD
1. Record five seconds of silence at the beginning of your message. This allows your machine time to listen for
fax tones.
We recommend beginning your OGM with an initial five second silence because the machine cannot hear
fax tones over a loud voice. You may try leaving out this pause, but if your machine has trouble receiving
faxes, then you should re-record the OGM to include it.
2. Limit your speaking to 20 seconds.
3. End your 20-second message by giving your Fax Receive Code for people sending manual faxes. For
example: “After the beep, leave a message or press *51 and Start to send a fax.”
Related Information
• External TAD (Telephone Answering Device)
256
To Next Page
Loading...
Need help?
General