Home > Routine Maintenance > Clean Your Brother Machine > Clean the Scanner
Clean the Scanner
1. Unplug the machine from the AC power outlet.
2. Lift the document cover (1). Clean the scanner glass (2) and the white plastic (3) with a soft lint-free cloth
moistened with water.
3. In the ADF unit, clean the white bar (1) and the glass strip (2) with a lint-free cloth moistened with water.
If you feel dirt or debris, clean the glass again. You may need to repeat the cleaning process three or four
times. To test, make a copy after each cleaning attempt.
When there is a spot of dirt or correction fluid on the glass strip, the printed sample shows a vertical line.
After the glass strip is cleaned, the vertical line is gone.
Related Information
• Clean Your Brother Machine
519
To Next Page
Loading...
Need help?
General