Home > Routine Maintenance > Clean Your Brother Machine > Clean the Outside of the Machine
Clean the Outside of the Machine
IMPORTANT
• Cleaning with volatile liquids such as thinner or benzine will damage the outside surface of the machine.
• DO NOT use cleaning materials that contain ammonia.
• DO NOT use isopropyl alcohol to remove dirt from the control panel. It may crack the panel.
1. If the paper support flap is open, close it, and then close the paper support.
2. Pull the paper trays (1) completely out of the machine as shown by the arrow.
• Tray #1
• Tray #2
3. Lift the paper support (1), and then pull it at an angle completely out of the machine as shown by the arrow.
4. Wipe the outside of the machine with a dry, lint-free cloth to remove dust.
5. Wipe the inside and the outside of the paper tray with a dry, lint-free cloth to remove dust.
527
To Next Page
Loading...
Need help?
General