Brother MFC-J450DW User Manual

76
j Place both hands under the plastic tabs
on both sides of the machine to lift the
scanner cover (1) into the open position.
Move the print head (if necessary) to
take out any paper remaining in this
area. Make sure that jammed paper is
not left in the corners of the machine (2)
and (3).
IMPORTANT
• DO NOT touch the encoder strip (1).
Doing this may cause damage to the
machine.
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
• If the print head is in the right corner as
shown in the illustration, you cannot move
the print head. Re-connect the power
cord. Hold down Stop/Exit until the print
head moves to the center. Then unplug
the machine from the power source and
take out the paper.
• If ink gets on your skin or clothing,
immediately wash it off with soap or
detergent.
1
2
3
1

Brother MFC-J450DW Specifications

General

Print Technology	Inkjet
Max Print Speed (Color)	27 ppm
Display	1.8" Color LCD
Duplex Printing	Yes
Paper Input Capacity	100 sheets
Functions	Print, Copy, Scan, Fax
Mobile Printing	AirPrint, Google Cloud Print, Brother iPrint&Scan
Memory	64 MB
Connectivity	USB, Ethernet, Wi-Fi
Automatic Document Feeder	Yes
Scanner Type	Flatbed
Max Print Resolution	6000 x 1200 dpi