General setup
5
1
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a Press Menu.
b Press s or t to display
General Setup.
c Press General Setup.
d Press s or t to display
LCD Settings.
e Press LCD Settings.
f Press s or t to display Dim Timer.
g Press Dim Timer.
h Press s or t to display 10Secs,
20Secs, 30Secs or Off, and then
press the option you want.
i Press Stop/Exit.
Dial Prefix 1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example, if your telephone
system requires a 9 to dial an outside
number, use this setting to automatically dial
9 for every fax you send.
Setting up or changing the
prefix number 1
a Press Menu.
b Press s or t to display
Initial Setup.
c Press Initial Setup.
d Press s or t to display Dial Prefix.
e Press Dial Prefix.
f Press On (or Off).
g Press Dial Prefix.
h Enter the prefix number (up to 5 digits)
by pressing the buttons on the screen.
i Press OK.
• To access an outside line, press ! .
• You cannot use ! with any other numbers
or characters.
• (Canada only) If the pulse dialing mode is
on, # and l are not available to use.
j Press Stop/Exit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
