Dialing and storing numbers
37
5
Storing Speed Dial numbers
from the Caller ID history 5
If you have the Caller ID subscriber service
from your telephone company, you can also
store Speed Dial numbers from incoming
calls in the Caller ID History. (See Caller ID
uu page 31.)
a Press History.
You can also press Redial/Pause.
You can also add numbers from the
history in a different way by pressing
Menu, Fax, Setup Speed Dial,
Set Speed Dial and
Add Number from History.
b Press .
c Press s or t to display the number you
want to store.
d Press the number you want to store.
e Press More.
f Press Add Speed Dial.
g Do one of the following:
If you want to store the displayed
name, press OK.
Enter the name (up to 16 characters)
by pressing the buttons on the
screen.
(uuBasic User’s Guide: Entering
Text)
Press OK.
To store the number without a name,
press OK.
h Press OK to confirm the fax or telephone
number you want to store.
i Do one of the following:
Enter a second fax or telephone
number (up to 20 digits) by pressing
the buttons on the screen.
Press OK.
If you do not want to store a second
number, press OK.
j To choose where the number will be
stored, do one of the following:
To accept the displayed next
available Speed Dial location, press
OK.
To enter a different Speed Dial
location, press and then enter a
2-digit number using the buttons on
the screen.
Press OK.
If the 2-digit Speed Dial location you
choose is already taken, the OK button on
the screen will not work. Choose a
different location.
k When the screen displays your settings,
press OK to confirm.
l Press Stop/Exit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
