Sending a fax
13
3
Restoring fax settings to the
factory settings 3
You can restore all the fax settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Press (FAX).
b Press Options.
c Press s or t to display
Factory Reset.
d Press Factory Reset.
e Press Yes.
f Press Stop/Exit.
Additional sending
operations
3
Sending a fax manually 3
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
To send a multi-page fax, use the ADF.
a Press (FAX).
b Load your document.
c To listen for a dial tone, press Hook.
d Dial the fax number.
e When you hear the fax tones, press
Black Start or Color Start.
If you are using the scanner glass, press
Send on the screen to send the fax.