PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
53
9
Print Images 9
View Photos 9
You can preview your photos on the screen
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the screen.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press (PHOTO).
b Press View Photos.
c Press s or t to display the photo you
want to print.
d Press + or - to select the number of
copies you want to print.
e Repeat step c and d until you have
chosen all the photos you want to print.
Press OK.
f You now have the following options.
If you want to change the print
settings, press Options.
(uuAdvanced User’s Guide:
PhotoCapture Center™ print
settings)
If you do not want to change any
settings, go to step g.
g Press Color Start to print.
PhotoCapture Center™
print settings
9
You can change the print settings for the next
printing.
These settings are temporary, and the
machine returns to its default settings
3 minutes after printing unless you have set
the Mode Timer to 2 minutes or less.
(uuAdvanced User’s Guide: Mode Timer)
You can save the print settings you use
most often by setting them as the default.
(uuAdvanced User’s Guide: Setting your
changes as the new default)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
