Brother MFC5890CN - Firmware Switches (WSW01 through WSW60)

App. 4-1
Confidential
WSW No. Function Refer to:
WSW01 Dial pulse setting App. 4-3
WSW02 Tone signal setting App. 4-5
WSW03 PBX mode setting App. 4-6
WSW04 TRANSFER facility setting App. 4-7
WSW05 1st dial tone and busy tone detection App. 4-8
WSW06 Pause key setting and 2nd dial tone detection App. 4-10
WSW07 Dial tone setting 1 App. 4-12
WSW08 Dial tone setting 2 App. 4-13
WSW09 Protocol definition 1 App. 4-14
WSW10 Protocol definition 2 App. 4-15
WSW11 Busy tone setting App. 4-16
WSW12 Signal detection condition setting App. 4-17
WSW13 Modem setting App. 4-18
WSW14 AUTO ANS facility setting App. 4-19
WSW15 REDIAL facility setting App. 4-20
WSW16 Function setting 1 App. 4-21
WSW17 Function setting 2 App. 4-22
WSW18 Function setting 3 App. 4-23
WSW19 Transmission speed setting App. 4-24
WSW20 Overseas communications mode setting App. 4-25
WSW21 TAD setting 1 App. 4-26
WSW22 ECM and call waiting caller ID App. 4-27
WSW23 Communications setting App. 4-28
WSW24 TAD setting 2 App. 4-29
WSW25 TAD setting 3 App. 4-30
WSW26 Function setting 4 App. 4-31
WSW27 Function setting 5 App. 4-32
WSW28 Function setting 6 App. 4-33
WSW29 Function setting 7 (Not used.) App. 4-34
WSW30 Function setting 8 (Not used.) App. 4-35
WSW31 Function setting 9 App. 4-36
WSW32 Function setting 10 App. 4-37
WSW33 Function setting 11 App. 4-38
WSW34 Function setting 12 App. 4-39
WSW35 Function setting 13 (Not used.) App. 4-40
WSW36 Function setting 14 App. 4-41
WSW37 Function setting 15 App. 4-42
WSW38 V.34 transmission setting App. 4-43
WSW39 V.34 transmission speed App. 4-44
WSW40 V.34 modem settings App. 4-45
WSW41 ON-duration of the scanning light source App. 4-46
WSW42 Internet mail settings (Not used.) App. 4-47
WSW43 Function setting 21 App. 4-47
WSW44 Speeding up scanning-1 App. 4-48
WSW45 Speeding up scanning-2 (Not used.) App. 4-49
WSW46 Monitor of power ON/OFF state and parallel port kept at high App. 4-50