51
List of barcodes for specifying settings
These are the barcodes for specifying settings used with the “BTP (Barcode Template Print) function”
(→ P.37).
Note
● When using the barcodes in this list, set “Trigger for P-touch Template Printing” and “Command
Prefix Character” to default in P-touch Template Settings.
■ P-touch template command (Initialize + begin specifying settings)
■ Basic settings
• Auto cut on*1 • Auto cut off
• Half cut on*1 • Half cut off
• Chain printing on • Chain printing off*1
• Mirror printing on • Mirror printing off*1
• Number of copies*2
PT9700PC9800PCN_US.book Page 51 Wednesday, October 7, 2009 11:58 AM
To Next Page
Loading...
