103
Arranging Embroidery Designs (Layout & Editing)
Arranging Embroidery Designs (Layout & Editing)
Fill stitch
Programmable fill stitch
Under
sewing
c
“Satin stitch” on page 101.
Density
Direction
Stitch
Type
Specify the shape of the returning ends of the stitching.
This cannot be specified if the sewing direction is set to
variable.
Half Stitch
c
“Half Stitch” and “Running Stitch Path” on page 102.
Running
Stitch Path
Step pitch Specify the stitching pitch (length of one stitch).
Short Long
Frequency Specify the shift in the stitches.
0% 50%
Pull
compen-
sation
c
“Pull compensation” on page 102.
Under sewing
c
“Region sewing attributes” on page 101 and 102.
Density
Direction
Half Stitch
Running Stitch Path
Pull compensation
To Next Page
Loading...
