Brother PE-Design 8.0 User Manual

55
Arranging Embroidery Designs (Layout & Editing)
Arranging Embroidery Designs (Layout & Editing)
■ Rotating numerically
1. Select the pattern(s).
2. Click Edit, then Numerical Setting, then
Rotate.
3. Type or select the desired rotation angle.
4. Click OK.
Grouping/Ungrouping
embroidery patterns
■ Grouping patterns
Several individual patterns can be grouped so that
the same changes apply to all of the patterns within
the group.
1. Select several patterns.
2. Click Edit, then Group.
→ The selected patterns are grouped.
■ Ungrouping patterns
1. Select a grouped embroidery pattern.
2. Click Edit, then Ungroup.
→ The patterns are ungrouped.
■ Editing grouped patterns
individually
Even after patterns are grouped, they can be edited
individually.
1. To select a single pattern within a group, hold
down the key while clicking the pattern.
To select multiple patterns within a group, hold
down the and keys while clicking
the patterns.
2. Edit the object as desired.
b Memo:
• An angle can also be selected by dragging
in the Rotate dialog box.
b Memo:
If part of a pattern with hole sewing or any
other path arrangement applied is selected to
be grouped, the entire pattern is grouped.
b Memo:
A light blue frame appears around the
grouped patterns whenever the group or an
individual pattern is selected.
b Memo:
Grouping is cancelled if patterns are deleted
to leave only one.
Alt
Alt Ctrl

Brother PE-Design 8.0 Specifications

General

Brand	Brother
Model	PE-Design 8.0
Category	Software
Language	English