Brother RJ-2030 - Turning the Printer on or off; Setting the Language of the LCD; Inserting the Paper or Label Roll; For RJ-2030;2050

Setting Up the Printer
12
1
Turning the Printer On or Off 1
On: Press and hold the (Power) button until the LCD turns on.
Off: Press and hold the
(Power) button until the message [System Off] appears on the LCD.
Setting the Language of the LCD 1
1 Press the [Menu], [b] button to select the [Settings] menu, and then press the [OK] button.
2 Select [ Language], and then press the [OK] button.
3 Select a language, and then press the [OK] button.
Inserting the Paper or Label Roll 1
For RJ-2030/2050 1
1 Pull the cover open lever in the direction shown to open the media roll compartment cover.
1 Cover open lever
2 Insert the media roll into the media roll compartment with the roll feeding from the bottom as shown.
1 Print surface
(faces outwards on the roll)
1
1