Brother RJ-2030 - Lcd; LCD Settings

Setting Up the Printer
30
1
LCD 1
LCD Settings 1
You can specify the LCD settings either by using the printer, or by using the Printer Setting Tool on a
computer connected to the printer. For more information about connecting a computer and specifying
settings, see Changing the Printer Settings on page 34.
Specifying Settings from the Printer 1
Press the [Menu], [ ] button to select a menu option, and then press the [OK] button. Press [ ] to select an
option, and then press the [OK] button.
1 The currently selected option is highlighted.
2 The scroll bar indicates the first parameter with the up arrow, and the last parameter with the down arrow.
If the last parameter is selected, pressing [ ] scrolls to the first parameter.
Displaying the Media Information 1
1 Press the [Menu], [ ] button to select the [Media] menu, and then press the [OK] button.
Setting the LCD Contrast 1
1 Press the [Menu], [ ] button to select the [Settings] menu, and then press the [OK] button.
2 Select [LCD Contrast], and then press the [OK] button. Select the option, and then press the [OK]
button.
Setting the Beeper 1
Select whether the printer beeps when an operation button is pressed.
1 Press the [Menu], [ ] button to select the [Settings] menu, and then press the [OK] button.
2 Select [Beeper], and then press the [OK] button. Select the option, and then press the [OK] button.
2
1