Brother RJ-2030 - Basic Tab

Changing the Printer Settings
56
3
Basic Tab 3
1Auto Power Off
Specify the amount of time that passes before the printer turns off automatically.
Available settings: [None], 1/2/3/4/5/6/7/8/9/10/20/30/40/50/60 minutes
2 Battery Charge Level
Specify the charging level.
Available settings: [80 %], [100 %]
Note
To get the longest life from the battery, select [80 %]. Although the number of pages that can be printed
on a single charge will be less when you select [80 %], you can get a longer life from the battery.
3 Command Mode
Select the printer’s command format.
Available settings: [Raster], [ESC/P], [P-touch Template], [CPCL emulation], [CPCL Line Print
emulation]
4 Text Direction
Select the printing orientation.
Available settings: [Normal], [Inverted 180 Degrees]
This setting is applied only if the printer driver is not used. If the printer driver is used, the setting specified
in the driver will be applied.
5 Print Speed
Select the printer’s printing speed.
Available settings: [3 ips / 76.2 mm/s], [4 ips / 101.6 mm/s], [5 ips / 127 mm/s], [6 ips / 152.4 mm/s]
6 Print Density
Adjust the printer’s printing density.
Available settings: -5–+5
2
1
3
4
5
7
8
9
6