Brother RJ-2030 - Page 45

Changing the Printer Settings
36
3
5 Paper Size Setup
Add media information and settings to the printer driver to use a size not listed in the [Paper Size]
list of the printer driver.
Important
To open [Paper Size Setup], you must be logged on with administrator rights.
6Exit
Closes the window.
3 Check that the printer you want to configure appears next to [Printer]. If a different printer appears, select
the printer you want from the drop-down list.
4 Select the setting you want to change, and then specify or change the settings in the dialog box.
For more information on the settings dialog boxes, see Communication Settings on page 37, Device
Settings on page 52, P-touch Template Settings on page 62, or Paper Size Setup on page 65.
5 Click [Apply]- [Exit] in the settings dialog box to apply the settings to the printer.
6 Click [Exit] in the main window to finish specifying settings.
Important
Use the Printer Setting Tool to configure the printer only when the printer is in standby. The printer may
malfunction if you try to configure it while it is handling a job.