Changing the Printer Settings
53
3
4 Disable these settings
When this check box is selected, appears in the tab, and the settings can no longer be specified or
changed.
Settings in a tab where appears will not be applied to the printer even if [Apply] is clicked. In addition,
the settings in the tab will not be saved or exported when the [Save in Command File] or [Export]
command is executed.
5 Current Settings
Retrieves the settings from the currently connected printer and displays them in the dialog box. Settings
will also be retrieved for parameters on tabs with .
6 Parameters
Displays the current settings.
7Exit
Exits [Device settings], and returns to the main window of the Printer Setting Tool.
8Apply
Applies the settings to the printer.
To save the specified settings in a command file, select [Save in Command File] from the drop-down list.
The saved command file can be used with the mass storage mode to apply the settings to a printer. (See
Mass Storage Mode on page 72.)
To Next Page
Loading...
