Other Functions
91
4
g To turn mass storage mode off, turn the printer off.
The printer will start up in its normal operating mode.
• When the printer is turned off, mass storage mode is deactivated and any files in the mass storage area
are deleted.
• This feature supports “.bin”, “.blf”, and “.jpg” files. Do not use other file formats with this feature.
• Do not create folders in the mass storage area. If a folder is created, files in the folder will not be executed.
• The capacity of the mass storage area is 2.5 MB. Use of files larger than 2 MB cannot be guaranteed.
• If multiple files are copied, the order that the files will be executed in cannot be guaranteed.
• Wi-Fi and Bluetooth features are not available while the printer is running in mass storage mode.
• Do not access other files in the mass storage area when executing a copied file.
JPEG Printing 4
Image data (JPEG) can be printed without using the printer driver.
• JPEG images can be printed using the mass storage feature.
• The Object Push Profile (OPP) is used for printing via a Bluetooth connection.
• This printer will convert a colour JPEG image to a ‘Black & White’ image using a dithering process.
• When sending a JPEG image that is already ‘Black & White’ this dithering process may make your printed
image fuzzy.
• To improve the image quality, try to turn off any preprocessing of the JPEG image.
Only JPEG images can be printed. (Limited to files with the .jpg extension.)
The maximum file size is 5 MB.
(2.38 MB when the mass storage feature is used.)
The maximum resolutions are as follows.
Height × Width = 8000 × 576 dots
If these limits are exceeded, the data received by the printer will be discarded and not printed.
1 printed pixel = 1 dot.
This printer performs binary processing (simple binary) to print the image.
The image is printed with the height-to-width proportion of the received data.
To Next Page
Loading...
