Brother RJ-3150 - Printer Driver Options; Printing Labels Stored in the Printer (RJ-3150 Only); Configuring the Template Mode; Printing Using the Operation Panel on the Printer

Using the Printer
45
2
Printer Driver Options 2
You can configure various settings in the printer driver screen, such as paper size, number of copies, etc.
You can also use the "Paper Size Setup" and the "Device settings" to configure advanced settings (see
Paper Size Setup on page 84 and Device Settings on page 66).
Printing Labels Stored in the Printer (RJ-3150 Only) 2
A label layout transferred to the printer can easily be printed, or the contents can be replaced with the
contents scanned using a barcode reader, then printed.
For details on creating labels, see Tips for Creating Templates on page 129.
Configuring the Template Mode 2
Configure the template mode so that it starts when the printer is turned on.
a Press the [Menu], [ ], or [ ] button to select the [Settings] menu, and then press the [OK] button.
b Select [Template Settings] > [Template Mode] > [On] using [ ] or [ ], and then press the [OK]
button.
Note
The mode can also be configured from a computer using the "Printer Setting Tool". For details, see
Device Settings on page 66.
Printing Using the Operation Panel on the Printer 2
a Turn on the printer. The template mode screen is displayed.
1 Template number
2 Database link icon (only if a database is linked)
3 Template name
4 Media name
b Press [ ] or [ ] to select a template to be printed, and then press the [OK] button.
3
4
2
1