Brother RJ-3150 - Printer Driver Settings

Setting Up the Printer
16
1
Important
• Before using the label peeler, specify the following settings:
• Device settings of the “Printer Setting Tool”: Specify [Peeler] for [Exit Position] on the [Basic] tab.
For details, see Device Settings on page 66.
• Printer driver: Select the [Use Peeler Function] check box on the [Basic] tab. For details, see Printer
Driver Settings on page 16 and After Printing on page 17.
• When not using the label peeler, specify the following settings:
• Device settings of the “Printer Setting Tool”: Specify [Tear] for [Exit Position] on the [Basic] tab. For
details, see Device Settings on page 66.
• Printer driver: Clear the [Use Peeler Function] check box on the [Basic] tab. To open the properties
dialog box for the printer driver, see step a in Printer Driver Settings on page 16.
Printer Driver Settings 1
a Display the printer’s [Printing Preference] dialog box.
 Windows Vista
®
/ Windows Server
®
2008
Click - [Control Panel] - [Hardware and Sound] - [Printers], right-click the printer whose settings
are to be changed, and then click [Printing Preference].
 Windows
®
7 / Windows Server
®
2008 R2
Click - [Devices and Printers], right-click the printer whose settings are to be changed, and then
click [Printing preferences].
 Windows
®
8 / Windows
®
8.1 / Windows Server
®
2012 / Windows Server
®
2012 R2
Click [Control Panel] in the [Apps] screen - [Hardware and Sound] - [Devices and Printers], right-
click the printer whose settings are to be changed, and then click [Printing preferences].
b Select the [Use Peeler Function] check box on the [Basic] tab.
c Click [OK] to close the dialog box.