Brother RJ-3150 - Turning the Printer on or off; Setting the RD Roll

Setting Up the Printer
10
1
Turning the Printer On or Off 1
Note
When turning the printer off, do NOT remove the battery until the STATUS indicator goes off (for RJ-3050)
or the LCD display turns off (for RJ-3150).
Setting the RD Roll 1
Note
• The RJ-3150 can display graphical loading instructions. Simply open the RD Roll compartment cover and
press the [Menu] button.
• The RJ-3150 is equipped with a label peeler and sensor to automatically separate a printed label from its
backing paper after it is printed.
For details on using the label peeler, see When Using the Label Peeler (RJ-3150 Only) on page 13.
On (Press and hold the (Power) button until) Off (Press and hold the (Power) button until)
RJ-3050 POWER indicator turns green STATUS indicator turns red
RJ-3150 LCD display turns on [System Off] appears on LCD display