Brother RJ-3150 - Recharging the Rechargeable Li-Ion Battery; While Installed in the Printer

Setting Up the Printer
5
1
Recharging the Rechargeable Li-ion Battery 1
While Installed in the Printer 1
The rechargeable Li-ion battery can be charged while it is inserted in the printer.
Perform the following procedure to charge the rechargeable Li-ion battery.
Note
• Before using the rechargeable Li-ion battery, use the following procedure to charge it.
• Fully charge a new battery. Initial charging will take about 3 hours.
• Print speed varies with the available battery voltage.
a Make sure that the rechargeable Li-ion battery is installed in the printer.
b Use the AC adapter and AC power cord to connect the printer to an AC power socket (see Connecting
to an AC Power Socket (Optional) on page 6), or use the car adapter to connect the printer to a DC
power socket (see Connecting to a DC Power Socket (Optional) on page 7).
Note
The battery indicator light is orange when the battery is charging. When the rechargeable Li-ion battery is
fully charged, the battery indicator light turns off. Disconnect the AC adapter or car adapter from the DC
connector.