Brother RJ-3150 - Begin Printing

Appendix C
188
21
1
These are used when specifying the number of copies printed and when selecting a template number.
Scan barcodes to specify a three-digit number, such as [0][0][7] or [0][1][5]. The setting is automatically applied when three digits have been
specified.
To change settings, scan the “Number of copies” barcode again when changing the number of copies or scan the “Select template” barcode again
when changing the template number, and then scan the barcodes for the new three-digit number.
Preset template 5 21 Preset template 6 21
Preset template 7 21 Preset template 8 21
Preset template 9 21 Preset template 10 21
Select template 21 Number of serialised copies 21
Delimiter 21 Initialise template data 21
Begin printing 21
^NN
^ID