Brother RJ-3150 - Paper Size Setup; Paper Size Setup Dialog Box

Printer Setting Tool
84
3
Paper Size Setup 3
With [Paper Size Setup] in the “Printer Setting Tool”, paper sizes not available in the [Paper Size] list of
the printer driver can be added.
As opposed to specifying paper settings for a normal printer, the paper format must be sent to the printer in
order to add the paper size to the printer.
Printing with a paper format not registered with the printer may not provide the intended print results.
Paper Size Setup Dialog Box 3
1 Current settings
Displays the current settings for the selected paper format.
2New
Click this button to display the [New] dialog box and register a new paper format. For details, see New
Dialog Box on page 86.
Important
Do not register a paper size if the same paper size has already been registered. It may cause unintended
results.
If you wish to use paper of the same size as one that is currently registered, select the desired size from
the [Currently Registered Paper Sizes] list in the [Paper Size Setup] dialog box, and then change the
settings from the [Edit] dialog box.
3Edit
Edits the settings for the selected paper format.
To save the selected paper format with the new settings, click [Overwrite]. To add a paper format with the
new settings, change the name in the [Paper Size Name] box, and then click [Add].
Preset RD Roll formats cannot be edited.
3
2
4
5
6
78
1