Brother RJ-3150 - 16 Configuring Your Printer for a Wireless Network; Using Your Brother Printers Own Functions (RJ-3150 Only); Establishing a Wireless LAN Connection; Displaying the Network Settings

167
16
16
Using Your Brother Printer’s Own Functions (RJ-3150 Only) 16
You can establish a wireless LAN connection, and configure or display the network settings using the
operation panel on the printer.
Establishing a Wireless LAN Connection 16
a Press the [Menu], [ ], or [ ] button to select the [WLAN] menu, and then press the [OK] button.
b Set [WLAN (On/Off)] to [On].
Wi-Fi communication is now available.
Displaying the Network Settings 16
a Press the [Menu], [ ], or [ ] button to select the [WLAN] menu, and then press the [OK] button.
b Select [WLAN Status], and then press the [OK] button.
The current settings are displayed.
c The screen returns to the main screen when you press the [OK] button.
Establishing a Wireless LAN Connection Using WPS 16
a First, confirm that your WLAN access point/router has the WPS symbol.
b Press the [Menu], [ ], or [ ] button to select the [WLAN] menu, and then press the [OK] button.
c Set [WPS] to [Start].
d Place your Brother printer within range of your WPS access point/router. The range may differ depending
on your environment. See the instructions provided with your access point/router.
e Press the WPS button on your WLAN access point/router and the [OK] button on your Brother printer.
f [WPS Setting] is displayed for a while, and then the WLAN icon on the LCD display is displayed in blue.
Note
• Your Brother printer will try to connect using WPS for 2 minutes. If the [OK] button is pressed during that
time, the printer will continue trying to connect for an additional 2 minutes starting from that point.
• If your Brother printer could not connect to the network, the Wi-Fi mark will not be displayed on the LCD
display.
Configuring Your Printer for a Wireless
Network
16