Troubleshooting
121
8
Unsupported USB Hub
Remove Hub
Is the printer connected to a USB hub?
RJ-3150 is not compatible with a USB hub. Turn off the printer, and then
disconnect the USB hub.
Battery Low
Recharge Battery
Does the rechargeable battery have a low charge?
Use the AC adapter and AC power cord to connect the printer to an AC power
outlet, or use the car adapter to connect the printer to a DC power outlet to
charge the battery.
System Error!
01
If the error message is displayed, contact Brother Customer Service.
System Error!
02
System Error!
03
Memory Full! Print jobs exceeding 1 m, or incompatible files cannot be printed.
An error is indicated if data is transferred, causing the capacity of the user
storage area to be exceeded.
Press [Menu] button for help You can view instructions for the operation in Help. While the printer is turned
on, open the RD Roll compartment cover, and press the [Menu] button on the
printer.
Error messages from the printer (RJ-3150 only) (continued)
Error Message Cause/Remedy
To Next Page
Loading...
