Setting Up the Printer
29
1
With the buttons on the printer, the following settings can be specified:
Menu Title Sub title Settings Description
Settings Printer
Settings
Print Density -5 Adjust the printer’s printing
density.
-4
-3
-2
-1
0
+1
+2
+3
+4
+5
Exit Position Tear Select the media output
location.
Peel
Print Adjust
(X)
*.** inch
(or *.** mm)
Adjust the position of the
reference point (point of
origin for printing). This
corrects printing
misalignments resulting
from differences in printer
models or from the fixed
margins of some
applications. The
reference point cannot be
adjusted for raster
printing.
Note
The display varies
according to the unit
setting.
Print Adjust
(Y)
*.** inch
(or *.** mm)
Tear Adjust *.** inch
(or *.** mm)
Adjust the tear bar tear off
position for paper media.
Note
The display varies
according to the unit
setting.
Beeper
Settings
On Select whether the printer
beeps when an operation
panel button is pressed.
Off
To Next Page
Loading...
