Brother RJ-3150 - Page 46

Setting Up the Printer
37
1
Note
• Some settings may differ depending on the firmware (printer software).
• If you want to reset the settings, use [Device settings] in the “Printer Setting Tool” to return all settings
to their factory defaults. For details, see Device Settings on page 66.
Setting the Time and Date 1
Adjust the clock to the current time and date. The time and date set here are displayed in the main screen.
a Press the [Menu], [ ], or [ ] button to select the [Settings] menu, and then press the [OK] button.
b Select [Clock Settings] using [ ] or [ ], and then press the [OK] button. The clock setting screen
appears.
c Use [ ] or [ ] to specify the last two digits of the year, and then press the [OK] button. Specify two digits
for the month and day in the same way.
WLAN WLAN (On/Off) On Turn the WLAN function
on or off.
Off
WPS Start Start the WPS
configuration.
Select [Back] to return to
the previous screen
without starting the WPS
configuration.
Back
WLAN Status Mode: ****
SSID: ****
IP Addr: *.*.*.*
Subnet: *.*.*.*
Gateway: *.*.*.*
MAC Addr: ****
Channel: ****
Display the WLAN status.
Bluetooth Bluetooth
(On/Off)
On Turn the Bluetooth
function on or off.
Off
Bluetooth
Status
Usage: ****
Device Name: ****
Visible: ****
Address: ****
Display the status of the
Bluetooth function.
Menu Title Sub title Settings Description