Using the Printer
41
2
(Bluetooth) button function
(RJ-3050 only)
Operation
Use Bluetooth to communicate when
printing
When this button is pressed while the computer and the printer are not
connected via Bluetooth, the Bluetooth connection is established and data can
be transferred (see Bluetooth Connection on page 25).
End the Bluetooth connection When the printer and computer are connected via Bluetooth, press this button
to end the connection.
Start up the printer in mass storage
mode
If you press this button while pressing and holding the (Power) button, the
printer starts up in mass storage mode (see Mass Storage on page 90).
(Cancel) button (RJ-3150 only)
Operation
Cancels the selection and returns to the previous screen.
(Up) Cursor button
(RJ-3150 only)
Operation
Selects the preceding item.
Enters the menu selection mode.
(Down) Cursor button
(RJ-3150 only)
Operation
Selects the next item.
Enters the menu selection mode.
OK button (RJ-3150 only) Operation
Activates the function mode for the selected item.
Start up the printer in mass storage
mode
If you press this button while pressing and holding the (Power) button, the
printer starts up in mass storage mode (see Mass Storage on page 90).
Execute a file stored in the mass
storage area
If you press this button while the printer is running in mass storage mode, you
can execute a command file stored in the mass storage area (see Mass
Storage on page 90).
Use WPS to set wireless network
settings easily
Wi-Fi settings can be configured by simply pressing and holding this button,
making it easy to install the printer driver or other software (see Installing the
Printer Driver and the Software on page 21).
For details, see Establishing a Wireless LAN Connection Using WPS
on page 167.
Menu button (RJ-3150 only) Operation
Enters the menu selection mode.
Selects the next menu option.
View information in Help While the printer is turned on, open the RD Roll compartment cover, and press
the [Menu] button on the printer.
To Next Page
Loading...
