Brother RJ-3150 - Page 62

Printer Setting Tool
53
3
5 Node Name
Displays the node name. The node name can also be changed. (See 7 Change Node Name/Bluetooth
Device Name in Menu Bar on page 54.)
6 Settings Tabs
Click the tab containing the settings to be specified or changed.
If appears in the tab, the settings in that tab will not be applied to the printer.
7 Settings Display/Change Area
Displays the current settings for the selected item. Change the settings as necessary using the drop-down
menus, direct entry or other appropriate methods.
8Refresh
Click to update the displayed settings with the most recent information.
9Exit
Exits [Communication settings], and returns to the main window of the “Printer Setting Tool”.
Important
Settings are not applied to printers if the [Exit] button is clicked without clicking the [Apply] button after
changing settings.
10 Apply
Click [Apply] to apply the settings to the printer.
To save the specified settings in a command file, select [Save in Command File] from the drop-down
menu. The saved command file can be used with the mass storage feature to apply the settings to a
printer. (See Mass Storage on page 90.)
Important
Clicking [Apply] applies all settings in all tabs to the printer.
If the [Disable these settings] check box is selected, the settings in that tab are not applied.