BRP EVINRUDE E15R4 - Page 35

ENGINE OPERATION 35
7
3. Set the throttle grip to START position.
1. Throttle grip
4. Pull the choke knob fully.
1. Choke knob
ENON00501-0
Note
Choke is not necessary when the engine is
warm. Set the throttle grip to “RE-START”
position.
ENON00502-0
Note
If engine does not start with 4 or 5 times
starting operation, push the knob back and
restart.
(For manual starter type)
This engine is equipped with a compres-
sion release mechanism.
5. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it quickly.
repeat if necessary until started.
1. Slowly
2. Quickly
3. Starter handle
(For electrical starter type)
4. Push the starter switch button and
release the button when the engine
has started.
1. Starter Button
5. Check the cooling water from cooling
water check port.
1
ENOF01107-0
1
ENOF003140
ENOF01211-0
1
2
3
1
ENOF00315-0
E15__US_EN_141125N.book 35 ページ ２０１４年１２月２６日 金曜日 午後２時４６分