ENGINE OPERATION36
7
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the stop
switch lanyard securely to the operator
or to the operator's PFD (Personal Flo-
tation Device.)
1. Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position.
4. Raise the free accel lever a little (both
of cold engine and warm engine).
ENON00504-0
Note
The free accel lever can not be raised when
the control lever shift is in Forward or
Reverse.
1. Neutral (N)
2. Control lever
3. Fully open (Forward)
4. Fully closed (Fully closed)
5. Free throttle lever
6. Main switch key
7. Stop switch
5. Turns the main switch key to START
position. Then, continuously push the
key to operate the choke.
ENON00503-0
Note
Choke operation is not necessary if the
engine is warm.
1. ON
2. START
3. OFF
4. Push to operate choke knob.
6. Stop pushing the key when the engine
has started.
The key returns to the original position,
automatically.
1
ENOF00869-0
N
R
F
1
2
3
4
5
6
7
ENOF00870-0
1
2
3
4
ENOF00871-A
E15__US_EN_141125N.book 36 ページ ２０１４年１２月２６日 金曜日 午後２時４６分
To Next Page
Loading...
