BRP Rotax 125 MAX evo - Page 14

RO
TAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
Pa
ge 13/58
Ed
ition 09/2016
Æ At
tach the pre-assembled upper coolant hose to the engine using 1 hose clamp
(Pos. 3), see Fig. 10.
Fig. 10
Æ Attach the pre-assembled lower coolant hose to the engine using 1 hose clamp
(Pos. 4), see Fig. 11.
¿ Note: The length of the upper and bottom hose is supposed to be different, but equal at
delivery. Therefore, cut the bottom hose using scissors or a knife.
Fig. 11