MATRON-Light with 2250-M Field Guide, Page 23
6.11 Tap
in answer to the warning message:
6.12 Close the window by tapping on
.
6.13 You may now continue your measurement by pressing the
key (Pause/Start).
6.14 Apply sound level calibrator Type 4231 to the microphone and activate by pressing
(
On/Off
on some models).
6.15 The calibration level will now be recorded. After approximately 20 seconds, switch off the
calibrator and remove it from the microphone.
6.16 Press the
key (Pause/Start) once. The traffic lights will now change to a flashing
amber colour.
6.17 Press
(Store) to save the results. Note the File Number in which your results have
been stored – this is found at the top left hand part of the screen, e.g.
. The first
part is the date (year:month:day) and the 003 is the third set of results that day (see section
2.2.7 for details on Auto-naming your results).
To Next Page
Loading...
