MATRON-Light with 2250-M Field Guide, Page 26
8.9 Click on
and then choose an appropriate option:
“Repeat selection” plays the selected part until you press “Cancel” on the pop-up menu,
“Selection” plays the part you have selected,
“To end” plays from where you selected to the end of that recording,
“All” plays all the recording, regardless of your selection point.
8.10 An Information screen informs you what is happening as here:
This can be minimised so that you can observe progress through the recordings.
The volume of the playback is controlled by both the instrument (use the
c
and
d
keys on
the 2250-M keyboard) and by the amplifier/loudspeaker.
8.11 You can quickly move from one sound recording to the next by tapping the
icon or move
back to the previous one by pressing the
icon.
8.12 You can quickly move through the results by tapping on the relevant part of the total noise
profile as here:
.The graph below the total profile
then shows you the detail (1.5Minutes) at the selected position.
8.13 You can scroll through the noise results by using (a) the cursor (b) the Step forward (
) and
Step backwards (
) icons located above the profile and (c) the time located between those
icons.
To Next Page
Loading...
